Hand Lamination Iron Roller

Hand lamination tools - Iron roller 2" or 4" width with diameter 16mm. Common use in FRP lamination.

Wax Solution

Wax Solution, is a liquid form wax additive for unsaturated polyester resin and vinyl ester resin. It will form a layer of waxy surface after UP resin or VE resin cured and the surface is non-sticky anymore. Usually, it used at last layer finishing of FRP lamination. Small quantity is needed to add into the resin.

Mold Release Agent Spray Can - Release Agent Spray Can 400ml

Mold Release Spray Can Non-silicone type. Our product is called Release Agent Spray Can 400ml. It is dry film mold release, suitable for FRP lamination, Epoxy and Polyurethane casting process, Silicone Rubber 2 part mold application and so on.

Mold Release Wax Paste - Honey Wax 250

Honey Wax 250, a type of paste form mold release wax for fibreglass lamination mold pre-treat application. Made in USA.

Foam Clear Coat

Foam Clear Coat, is a special coating for protecting polystyrene foam and polyurethane foam. It has two components which is Part A as Resin and Part B as Hardener. It protects foam surface, making foam surface glossy, and strengthen its surface. It can be brushed or sprayed depends on your environment.

Portal Trading

Portal Trading, a business of supply chain of raw materials and chemical products. We are supplying the materials into majority industries such as plastic and rubber, paint and coating, E&E, automotive and automation, sundry and stationery, household and personal hobby (DIY) and so on. If you are interested to buy the materials, please contact us  as below:-
Email: sales@portaltrading.com.my or portaltrdng@yahoo.com.
Contact: +6012-5230750  Fax; +604-5872001 Website:www.portaltrading.com.my
Blog: portaltradingpenang.blogspot.com

Zahn Cup #1 ~ #5

Zahn Cup, is another type of viscosity cup which is made in USA and widely use it to measure viscosity of paint and coating industry. It has five type of diffrerent measuring cup from #1 ~ #5 for different viscosity liquid. For more information, please contact Portal Trading, HP: +6012-5230750 Mr.Moey.

Viscosity Cup NK-2

Viscosity Cup NK-2 for measuring liquid viscosity. It made in Japan, stainless steel cup with middle drill a liquid flow small hole. It is suitable for measuring viscosity of paint, coating, glue, beverage, oil and so on. Viscosity range from 20~300Cst.

Silicone Oil

Silicone oil, is a synthetic liquid polymerized siloxane with organic side chain. Usually, we called it as PDMS or polydimethylsiloxane. There polymer is excellent in thermal stability and their lubricant properties. Application: Lubricant, silicone grease, mold release agent, heat bath or heat oil oven, additive in silicone rubber and cosmetic, defoamer and so on.

Pantone Formula Guide The Plus Series Color Chart

Pantone Formula Guide The Plus Series color chart, it comes in two books a set which is solid coated and solid uncoated. This is the latest version we brought in now. The front cover may different as Pantone design a series of it.

RAL Color Chart K5 and K7

RAL color charts we carry now is K5 and K7 series, both are classic color chart. For K5, it has two books which perform different colors effect in glossy and semi-matte surface each. Each color in a card. For K7, it is printed 5 colors in a card. It is more on semi-matte colors and insert few new glossy colors.

Mold Release Paste

Another type of mold release paste we carry. It is TR Wax.

Mold Release Paste

Megular's Mirror Glaze mold release paste, for fibreglass release application. We carry Mirror Glaze #0811 and #8811.

Pigment Powder

Pigment powder, suitable for water base or solvent base paint making. It also can be used in plastic compounding.

Pigment Paste

Pigment paste, our formulated products. It is compatible for unsaturated polyester resin, epoxy resin, polyurethane (PU) resin and so on. It comes in high solid concentrated paste. Mixing dosage about 10~15% depends on what color and resin is used. We also custom make RAL color paste.

Methyl Ethyl Ketone Peroxide

Methyl Ethyl Ketone Peroxide, a catalyst as unsaturated polyester resin hardener. Butanox M60 is one of the product we carry now.

N,N-Dimethylaniline (DMA Solution)

N,N-Dimethylaniline (DMA) is an organic chemical compound, a substituted derivative of aniline. DMA serves as a promoter in the curing of polyester and vinyl ester resins. DMA is also used as a precursor to other organic compounds.

Aluminium paste

Aluminium paste, is a concentrated paste form aluminium powder. It has two categories, which is leafing and non-leafing. Usually, it mix with paint resin to make metallic paint or silver paint for plastic, automotive, metal part and so on..





After making metallic paint, maker will test the
spraying performance.

PU Foam Spray Can

PU Foam Spray Can, used to seal wall cracks, pipe insulation, automotive sound insulation, sculpture crafting and so on. Packing in aerosol spray can 750ml. Easy to use.

Cobalt Naphthenate Solution

Cobalt naphthenate solution is a liquid dark purple blue solution. It is diluted cobalt naphthenate into hydrocarbon solvent about 1%, 6% or 10% concentration for industrial requirement purpose. It used as promoted for unsaturated polyester resin and vinyl ester resin. For paint industry, it used as drier for making the paint dry. Some stationary such as pen used it in writing ink making.

 We just supply Cobalt Naphthenate Solution. >>>>>>>








Cobalt Naphthenate Flake.
<<<<<<<<<

Epoxy Resin

Epoxy Resin is two components liquid type chemical product. Part A is Resin and Part B is Hardener. After mixing both with certain ratio, it will begin chemical reaction. Then, it will gel and cure become solid or flexible plastic. Most of its application such as fibreglass lamination, toys or statue casting, souvenir casting, protective coating, adhesive glue, engineering casting part, insulation coating and so on.

Two pails of epoxy resin with hardener.

Fibreglass materials

Those who are interested to build or modified their car, bike, machine and so on, you can use fibreglass materials or composite materials. We carry some fibreglass products such as chopped strand mat, woven roving, fibreglass cloth, carbon fibre cloth, surface veil (or called it as tissue surface mat) and so on.

Fibreglass will be laminated with synthetic resin such as unsaturated polyester resin, epoxy resin, phenolic resin and polyurethane resin to form a composite part or panel for different application.
You can do it your own at home. Simple and easy to use.

Chopped Strand Mat come with 300grams/sqm or 450grams/sqm

Woven roving with 200grams, 400grams, 600grams and 800grams per sqm. Common grade in Malaysia is 600grams and 800grams.

Carbon fibre cloth 216grams per sqm. An expensive materials, but light weight and good mechanical strength with certain thickness.

Surface veil mat or called as tissue surface mat, light and thin. Easy to handle when doing lamination.

Fibreglass cloth is smooth and light weight with good mechanical strength composite material.

PU Foam Rigid

PU Foam Rigid is two components polyurethane foam liquid chemicals, which is in color of yellowish (Part A) and dark brown (Part B). After both Part A and Part B mixing with ratio 1:1, it will build bubbles and expanding about 20~30 times of original size.

Example: 20grams Part A mix with 20grams Part B, then pour it into a mineral bottle 500ml immediately. It fills the bottle after 15~30 minutes. Let it cures about 60 minutes, it will become a solid rigid block in the bottle.

For more information, please contact our sales person Mr.Moey HP: 012-5230750 or email: portaltrdng@yahoo.com or visit official website: www.portaltrading.com.my.

Silastic JRTV Rubber Based with Curing Agent

Silastic JRTV Rubber base with Curing Agent is another type of silicone rubber in liquid form, which is made by Dow Corning. This type of Silicone Rubber is high performance grade. Suitable for low temperature about 180~200 Degree Celsius metal alloy casting. Some automation and automotive industry used it to make mold and gasket.

Silicone Rubber Mold Making Kit

Silicone Rubber Mold Making Kit is a useful liquid form chemicals for flexible mold making application. It comes in two components which is Rubber Base (Part A) and Curing Agent (Part B). After mixing with formulated ratio, the mixture of Part A with B will slowly turn to solid rubber.

For the application, most users making toys, statues, candles, soap, candies, chocolate, souvenir and engineering part rubber mold with using it. 

Portal Trading carry different type of silicone rubber mold making products, different requirements different cost different performance. For further information, please do not hesitate to contact us @ HP: +6012-5230750 Mr.Moey or email: portaltrdng@yahoo.com.